Combo 70mm / 12 blades / 2000kv (inrunner) / 6S / 274g
> 6S (25V) : 75A / 2650g / 1875W
Available
Warning: Last items in stock!
Availability date:
By buying this product you can collect up to 6 points . Your cart will total 6 points that can be converted into a voucher of US $0.22 .
Weight (gr): | 274 gr |
EDF thrust (categorization) | 2-3kg |
Direction of Rotation (EDF Rotor) | Classic Counter Clock Wize (CCW) |
EDF Diameter Class (mm): | 70 |
Blades: | 12 |
Turbine shroud | Synthetic |
EDF Rotor | Synthetic |
Turns/min/Volt (Kv): | 2000 |
Motor Type: | In-Runner |
Motor Diameter (mm): | 30 |
Shaft diameter (mm): | 4 |
Battery Cells: | 6s - 22.2v |
Connection: | PK 3.5mm |
The motor and fan unit comes assembled and balanced from the factory.
Description / LiPo | 6s (25v) |
Thrust: | 2650 g |
Current: | 75 A |
Power: | 1875 W |
Recommended ESC: | 90 A |
Recommended battery: | 2600-4000mAh |
The controller should be chosen 20% over rated due to the long lasting load.
LV = low voltage controller up to 6s, HV = high voltage controller above 6s.
Battery should be chosen about 15/ - 1/20 of the max current for 4-3 minutes WOT. 30-40 C is appropriate.
Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. It is important that these components are set up properly. Failure to do so can void the warranty. It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system. If the output is above the factory recommended specs, then it needs to be adjusted by the esc. The timing and throttle settings on the esc can help to set the appropriate levels.
The following statistics are only displayed on your client account